LANDBX T3
LOOK WHAT JUST LANDED!
TM
300 GALS of HYRDO-SEEDING POWER for your compact track loader!
TM
LANDBX is designed to efficiently deploy water, foam, dust control, erosion tack, and hydro-mulch (seed) with all the FYREBX toughness.
You will get a higher level of functionality & productivity with the LANDBX attached to your compact track loader. Allowing you to reduce or eliminate the need for additional vehicles and manpower to accomplish many job site tasks.
LANDBX T3 is a patent-pending compact track loader attachment that disperses 300 gallons (1,135 Litres) of water or other water-soluble liquids, including the ability to spray hydro-mulch (seed) across terrain that many trailer systems and larger equipment can’t access.
LANDBX T3 features two independently controlled nozzles with a dual-port design that creates a recirculating flow for continuous mixing within the tank.
Who is LANDBX for?
Construction:
Dust control, Erosion control, Water for Operations, Hydro-mulch (seed), washing equipment, and more.
Agriculture (Ranch, Farm, Wineries, Orchards)
Spray fertilizer, Watering livestock, Hydro-mulch (seed), Water distribution, weed control, Fire response, and more.
Landscaping:
Hydro-mulch (seed), Erosion control, Water distribution, Spray fertilizer, Weed control, Washing off job sites, and more.
Utility Services:
Site repair, Fire response, Dust control and more.
This track loader attachment can do pretty much everything the FYREBX T3 can do and more with the addition of its revolutionary recirculating nozzle system for hydro-mulch (seed).
The LANDBX T3 features the same modular approach allowing for many types of accessories to greatly expand the functionality of this CTL attachment - including a dozer blade, winches, hose reels, and an auxiliary pump to refill your LANDBX in the field.
THIS IS LANDBX
GETTING THE LANDBX READY TO ROCK
LIVE HYDROMULCH DEMO
LANDBX T3 SPECS
Volume: 300 Gallons (1,135) Litres.
Dimensions: 83" wide x 41" tall x 61" deep (211 cm wide x 104 cm tall x 155 cm deep).
Weight: Empty +/- 850 lbs. Full (386 kgs) +/- 3,300 lbs (1,497 kgs) (no blade) or +/- 3,500 lbs (1,588 kgs) (with blade).
Attaches to all Track Loaders with a 3,000 lb (1,361 kg) plus operating weight.
Circulatory agitation up to 250 gpm (946 LPM). Pellet hydro-mulch or hydroseed material only.
Spray from nozzle, hose, or monitor gun.
Air aspirated nozzle will produce 10:1 expansion = 3,000 gals (1,361 kgs) of foam.
Submerged Hydraulic water pump: water flow rate with 250 feet (7.62 m) of 1.5" (38.1 mm) fire hose and a 1.5"x 5/8" (38.1 mm x 15.875 mm) tapered nozzle tip produces 115 psi @ 70 GPM (52 ksi @ 265 LPM). The hydraulic flow control was set at 16 GPM (61 LPM) to achieve these flow rates.
The hydraulic flow control can be adjusted from #5 (8 GPM/30 LPM) to #10 (16 GPM/61 LPM) on the flow control to achieve your desired water psi and GPM.
Hydraulic water pump: flow rate 5 GPM to 250 GPM (19 LPM to 946 LPM) of water.
Track loader standard hydraulic flow required.
All plumbing 1.5” NST.
Cathodic protection.
Construction: Multiple interior baffles, Exterior 10 & 12-gauge steel.
Finish: Double powder coat on interior and exterior.
Accessory receivers: 2" (5.08 cm).
Compact track loader attachment plate: 3/8" (9.525 mm) steel.
Four (4) lift points for helicopter or crane: rated to 6,000 psi/hook (24K psi total) or 2,722 ksi/hook (10,886 ksi)
Forklift skids: 1/4” (6.35 mm) steel.
Drafting capability from two 3” (76.2 mm) ports to pump forward.
(Updated: 2024-03)
